It is my pleasure and privilege to invite you to participate in the 2nd International Conference on New Research and Development in Technical and Natural Science, ICNRDTNS. The conference will take place in Radenci, Slovenia, from the 22. to the 24. September 2021.
Taking into account the threat from the COVID-19 pandemic ICNRDTNS 2021 will be organized as a Hybrid Convention. This means that the implementation of all program elements is carried out physically and virtually (online), depending on the pandemic situation and the possibilities and requirements of the participants. ICNRDTNS will ensure secure physical conditions and availability to virtual presence, through advanced communications, collaboration and interaction on hybrid conference platform.
So far, many countries have either confirmed participation or intent to participate.
The first bioclimate health resort in Slovenia, featuring springs of mineral and thermal Radenska water, invites relaxation that will boost your health and well-being. Numerous regular guests are loyal to this health resort with a big heart.
The conference venue is the hotel Radin.
The PROGRAMME of ICNRDTNS includes plenary sessions, core dialogues, debates, discovery demos, knowledge exchange sessions, knowledge factories, networking meet-ups, panel talks and poster presentations on specific topics and informal networking opportunities in which practitioners share their experiences, ideas, new information and perspectives.
In the EXHIBITION AREA of ICNRDTNS, leading international manufacturers, suppliers and service providers present their latest products and services. Most participants see the exhibition as an important meeting point for professional interaction and networking within the conference.
Information and directions on registration, payment, abstract and manuscript submission, hotel booking and local transportation is available here on the official website forthe ICNRDTNS.
For further questions contact us by e-mail.
On behalf of the Organizing Committee, we welcome you to Radenci, wishing you a unique scientific and cultural experience
On behalf of the Organizing Committee
President of the ICNRDTNS
Assist. Prof. Dr. Matej Babič., Ph.D.
Dr. Gyula Varga, PhD
Institute of Manufacturing Science
Assoc. Prof. Gyula Varga is an Associate Professor at the Institute of Manufacturing Science, University of Miskolc, Hungary. He was graduated at University of Miskolc, Hungary (1979), as a mechanical engineer, and then he got his PhD degree at the same University (1996). In the first 2 years of his professional carrier he worked as a scientific scholarship trainee at the Department of Mechanics at University of Miskolc. His research field was the FEM analysis of double curved shell elements. Then he worked for the Research Institute for Combustion Technology from 1981 till 1990 as a research assistant and senior researcher. He performed his activity in the fields of combustion theory, analysis of heat transfer, design of different industrial gas burners, among them one was patented with two co-authors. From 1990 he works for the Department of Production Engineering (its name now Institute of Manufacturing Science) as assistant lecturer later senior lecturer and from 1997 associate professor. In the meanwhile, he got a four month “Excalibur scholarship” at University of Manchester Institution Science and Technology (UMIST) in Manchester, UK in 1993. He got the Szechenyi Istvan scholarship in between 2002 – 2005. He participated also in number of industrial R&D projects dealing with different problems of production engineering. His main research field is the examination of environmentally conscious machining, and theoretical and experimental investigation of the technology of diamond burnishing. The number of my publication on his research field is more than 240.
Dr. Ladislav Hluchy, PhD
Director of the Institute of Informatics of the Slovak Academy of Science
Assoc. Prof. Ladislav Hluchy is the director of the Institute of Informatics of the Slovak Academy of Sciences and also the head of the Department of Parallel and Distributed Computing at the Institute. He received M.Sc. and Ph.D. degrees, both in computer science. He is RD Project Manager, Work-package leader in a number of 4FP, 5FP and 6FP projects, as well as in Slovak RD projects (VEGA, APVT, SPVV). He is a member of IEEE, ERCIM, SRCIM, and EuroMicro consortiums, the editor-in-chief of the journal Computing and Informatics. He is also (co-)author of scientific books and numerous scientific papers, contributions and invited lectures at international scientific conferences and workshops. He also gives lectures at Slovak University of Technology and is supervisor and consultant for Ph.D., master and bachelor studies.
Dr. Cristiano Fragassa, PhD
M.Sc. in Nuclear Engineering and Ph.D. in Engineering of Materials at the University of Bologna, he has been assuming several roles inside this and other Higher Education Institutions in Europe.
In his actual position of Assistant Professor in Bologna, he performed an intense teaching activity in courses related to topics of Industrial Engineering as Engineering of industrial products; Advanced techniques for Design of Machines; Elements of Design of Machines; Security and Reliability of Mechanical Systems; Functional and Aesthetical Design of Systems.
As Contract Professor, he also performed part of courses in other Universities as Reggio Emilia, Belgrade, Kragujevac (Serbia), Rijeka (Croatia).
He has been implemening a constant research activity mainly focused on Innovative Materials at both levels of scientific investigations and industrial innovation. Author of more than one hundred contributions as scientific papers and industrial memories. He participated to more than 60 congresses and workshops all over the World, including 12 invited lectures.
He has been very active in Transfer of Technology actions toward enterprises, also holding several training courses in specific industrial sectors.
Adding, he has been assuring a continuous action in fund raising and in project management within national and EU funded research/collaborative projects. He took relevant parts (as coordinator, supervisor, main investigator, etc.) in more than 25 projects. Specifically, referring to the topic of employability, he was the coordinator of “ATC Serbija”, an EU Regional Development project, where a didactical laboratory for life-long learning was established in the centre of Western Balkan in the business area of automotive. Its aim was to support on-the-job training and fast employment of more than 100 secondary students and unemployed technicians. Currently, he is coordinator of “AdriaHub”, a EU IPA project aiming at creating better conditions for employability of graduate students through the whole Adriatic area. At the moment, around 30 young researchers are involved in this pilot action.
Finally, since 2009 he is external evaluator for EU Commission (including the EU Institute of Technology) and for the Italian Minister of Economic Development. These experiences, together with the participation in several Committees, have permitted him to establish a wide network of personal relations.
Dr. Michele Calì, PhD
Prof. Michele Calì works as an Engineering Researcher and Assistant Professor at Electric, Electronics and Computer Engineering Department, University of Catania, Sicily, Italy.
He has got a B.S. degree in Mechanical Engineering and a Ph.D. degree in Engineering Structural Mechanics (at University of Catania).
He has published more than 50 articles in national and international journals along with more than 70 papers in national and international conferences.
His main research interests include CAD/CAE modeling, analysis and programming; Mechanical assembly and tolerance; Image Processing, Computer Aided Tolerancing (CAT), Geometric and Structural Optimization; Multibody dynamics and FEM simulation and optimization; Applications of RP and RE techniques in Mechanical fields and in Biomedical Engineering; Computational Mechanics and models; Theory of Elasticity (anisotropic, non-linear and linear materials); flying Sail cloth analysis; Composite Materials; Microstructural Models; Multi-scale modeling of cell-matrix interaction; Joint Contact Mechanics, Analysis of bone-implant systems for orthopaedic and dental prostheses in Biomechanics.
He is a member of the Editorial Board of IJIDeM International Journal (Springer Nature) as well as Editor in Chief of “Modelling and Simulation in Engineering” International Journal of Hindawi, Guest Editor of Special Issue “Design of Additively Manufactured Lattice Structures for Biomedical Applications Technology” Journal of Healthcare Engineering, Hindawi. Editor in Chief of Special Issue “Smart Manufacturing Technology” Applied Sciences Journal (ISSN 2076-3417), and others important Journals.
He is currently a member of a research group in designing and developing of a mobile loading system for concrete mixers, with earlier scientific responsability of a research group in designing and developing of a new system for Advanced Industrial Sludge Treatment with Closed Cycle Drying Process.
He is a member of many Italian Scientific Associations and committees (ADM; ATA; AIAS; AIMETA; CMM).
For 25 years he has been teaching in different Italian Universities, involved in extra-academic teaching activities, as well. Moreover, he has attended as a lecturer and chairman various International and National Conferences and Congresses (particularly in Germany, Alghero, Dubrovnik and Florida). Additionally, he has performed relevant editorial activities as a member of Scientific Committees and as a reviewer for several prestigious Journals (Strojniški vestnik – Journal of Mechanical Engineering; IREME; Sensor; Journal of Mechanical Engineering Science; Proceedings of the Institution of Mechanical Engineers; Vehicle Dynamics Journal; Mathematical Problems in Engineering; Materials; Modelling and Simulation in Engineering; Applied Bionics and Biomechanics Journal; International Workshop on Materials Science and Mechanical Engineering (IWMSME) and finally revision activity for important Journals and International Scientific Congress and Conferences.
Prof. Dr. Ninoslav marina, PhD
Prof. Ninoslav Marina has been Rector of the University of Information Science and Technology (UIST) in Ohrid since 2012. He was President of the Rector’s Conference of the public universities in the Republic of Macedonia (2015-2018).Dr. Marina graduated at the Faculty of Electrical Engineering Skopje in 1998 and obtained his Ph.D. degree at École Polytechnique Fédérale de Lausanne (EPFL) in 2004. In partnership with Nokia Research Centre in Helsinki, his thesis was in information theory with application to wireless communications. Ninoslav Marina was Director of R&D at Sowoon Technologies (2005 – 2007), visiting scholar at University of Hawaii at Manoa in Honolulu (2007 – 2008), postdoctoral researcher at University of Oslo (2008 – 2009) and postdoctoral Marie Curie Fellow at Princeton University (2009 – 2012). Prof. Marina co-authored more than 100 scientific papers, books and popular texts and has been a guest professor at more than twenty universities in countries including United States, Japan, United Kingdom, Italy, Israel, Russia, Brazil, China, Hong Kong, Norway, Finland, Indonesia, Malaysia, Morocco, Portugal, Azerbaijan and the Czech Republic. Dr. Marina is a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and is one of the co-founders of the Macedonian Chapter of the IEEE Information Theory Society. He is an Associate Editor of Telkomnika Indonesia and was also Technical Program Committee Chair of the International Congress on Ultra Modern Telecommunications and Control Systems (ICUMT). In 2015, Prof. Marina was a panel member at the United Nations General Assembly informal interactive consultations on the World Summit on the Information Society in New York.